Kit, bodywork, grp, stock shape, with grp tank, painted rothmans Tyga Honda NSR250

Kit, Bodywork, GRP, stock shape, with GRP tank, NSR250 MC28, Painted Rothmans
Consists of the following products:
BPFT-0007Painted: Upper Cowling (Street GRP) MC28, Stock Shape, Painted Rothmans
fibreglass replacement of the OEM shape upper, painted Rothmans
requires screen ( not included) SCRE-0021, SCRE-0022. SCRE-0023, SCRE-0024 and SCRE-0025
BPFL-9001Painted: Lower Cowling (GRP), NSR250, MC28, Stock Shape, Painted Rothmans
This part is a direct replacement for the OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts retained. Compatible with stock and Tyga exhaust systems.
BPFT-0007Painted:Seat Cowling (GRP), NSR250 MC28, Stock Shape, Street, Painted Rothmans
This painted seat cowling is a direct replacement for the stock plastic seat cowling and is exactly the same shape. Unlike the plastic part, it doesn’t have joins between the sides and the tail piece and it can even be ordered without the passenger seat pad strap holes to give a factory race look. There is no compromise in practicality though, and the panel features the luggage door and all mounting tabs for the taillight, duct shroud and luggage bracket. It can be used with stock Honda parts or TYGA parts
BPFG-0001 Fuel Tank, GRP, NSR250, MC28, Painted Rothmans
Top quality reproduction of the steel MC28 fuel tank in GRP. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one). Using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Painted Rothmans.
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
See also:
BPFS-0184 set with no tank
BPFS-0186 set with Carbon tank
Note, this set does not include front fender or windscreen. Please select BPFF-0009 Painted Rothmans for a stock front fender or contact us if you have different forks and require a different front fender painted to suit. For windscreen, you can either use the original Honda one or select SCRE-0021, SCRE-0022. SCRE-0023, SCRE-0024 or SCRE-0025
Weight
1 kg
Tyga no
BPFS-0185