The CAPRISTO high performance complete system is intended to be a balanced increase in power, drivability and sound quality, not forgetting of course a substantial weight loss. All this is delivered while maintaining the CAPRISTO philosophy, the best of both worlds, which offers the ability to produce an aggressive exhaust note under acceleration and a more subdued sound for city driving.
The exhaust system is designed to be installed directly into existing OEM mounting points
Compatible with Porsche 991.2 Carrera S Biturbo produced from 2016 to 2019
The CAPRISTO high performance complete system is intended to be a balanced increase in power, drivability and sound quality, not forgetting of course a substantial weight loss. All this is delivered while maintaining the CAPRISTO philosophy, the best of both worlds, which offers the ability to produce an aggressive exhaust note under acceleration and a more subdued sound for city driving.
The exhaust system is designed to be installed directly into existing OEM mounting points
Compatible with Porsche 991.2 Carrera S Biturbo produced from 2016 to 2019
**Original Carrera S exhaust tips are used. If the OEM system has only one exit per side (Carrera Base), the original Porsche exhaust tips must be obtained from the OEM twin pipe systems (Carrera S).
The CAPRISTO high performance complete system is intended to be a balanced increase in power, drivability and sound quality, while of course saving a substantial amount of weight. This is all delivered while maintaining the CAPRISTO philosophy of the best of both worlds, offering the ability to produce an aggressive exhaust note under acceleration and a more subdued sound for city driving.
This feature is achieved by using vacuum actuated valve flaps that open and close depending on driving conditions and driver input. At lower engine speeds and during cruising the valves are closed, producing a deeper exhaust note. With the throttle wide open, the valves open releasing the full symphony of the engine.
The exhaust valves are controlled by back pressure and via the included Valve Controller Remote which allows the flaps to be permanently opened without the series control being able to intervene. When the exhaust valve system is closed again using the remote control, the series control unit will once again take over control of the exhaust valves. This allows for precise control of the exhaust to suit the driver's personal taste and tolerance.
CAPRISTO exhaust systems are designed and manufactured using advanced 3D laser scanning, CAD design, digital prototyping and CNC bending/milling in our factory in Germany. Each system is made from high quality T309 (1.4828) stainless steel and hand polished to a mirror finish. After extensive research, this specific alloy was chosen for its sound resonance properties, low weight and durability which are close to the properties of Inconel (used in F1).
250 CELL SPORTS CATALYSTS:
High performance sports catalytic converters feature a 250 cell per square inch substrate made from the highest quality materials currently available, designed to improve airflow to your vehicle and increase performance.
The cell count of a catalytic substrate refers to the number of holes per square inch and is a direct indication of the flow capabilities of that substrate. The fewer the holes, the larger the hole needs to be to fill a square inch, a larger hole subsequently allows more exhaust gas to flow.
All that high flow won't help if the substrate is "squeezed" into a small diameter container or tube. For this reason, CAPRISTO Sport Cats come packaged in 5.2-inch packages to maximize exhaust gas flow and valved exhaust system operation.
IMPORTANT
*Exhaust system is designed to install directly into existing OEM mounting points*
*Recommended for off-road and track use only*
Replacing the OEM catalytic converter may activate a CEL (Check Engine Light).
To disable a recurring CEL you will need to tune the ECU or use 02 sensor extensions.
